Coil ^(TM)

Product Overview

Where to use:
Long, exposed ledges, parapets, signs, beams, pipes, etc.

Target Bird: Pigeon or larger

Bird Pressure: Light to medium

Material: Stainless steel

Installation: Stainless steel clips can be glued or screwed to mounting surface. The Coil can be stapled to wood

Ease of Installation: Easy

The Coil can be installed in multiple rows to protect wider ledges.

 

Bird Barrier's Coil is America's most innovative, versatile, easy-to-use, anti-perching system. Made of high-grade stainless steel, the Coil is perfect for long, narrow, exposed ledges.

Almost Invisible
The Coil will not interfere with the aesthetics of your building; it literally blends in with your architectural structure. When seen from a distance of twenty feet or more, the Coil virtually disappears and from fifty feet, it's invisible.

How It Works
Based on the simple premise that birds like a solid landing platform, the Coil de-stabilizes the ledge, causing unwanted pigeons to take their mess elsewhere.

Totally Humane
The Coil's smooth curves cannot harm the birds like other products on the market, and an unsuspecting workman will not scream in pain as he plants his hand firmly upon a ledge protected by the Coil as he will if he hits other ledge products on the market.

How to Install The Coil
The Coil can be attached to any surface material with a simple stainless steel clip which can be glued or screwed to the ledge. Just mount one clip every foot with Bird Barrier Bond, Super Bond, or with the appropriate screw, and clip the Coil in place. It's fast, easy and very secure.

Coil clips are mounted (glued or screwed) every 12", 1-3/4" from the edge. Coil end post is screwed or glued to ledge, helps end Coil loops stand up.

The Bird Barrier Coil is easy to install and very hard to see on long, straight ledges like the parapet and lower ledge in the photo.

---

Important Installation Tips:
. Installation surface must be clean and dry
. Coil must be clipped, glued or stapled every 12 inches (30 cm)
. Make sure you have access to areas
. Make sure you have measured correctly before starting
. All corners and small areas must be protected
. Coils must not be interwoven with each other
. Coils must overhang outer edge by at least 1/4 inch (6mm)
. Ends of Coil must stand up
. Consecutive Coils must be connected using the crimping device

Multiple Coils can be attached end-to-end with the pre-installed crimp at one end

---

Copyright 1998 Bird Barrier

(800) 503-5444 or (310) 793-1733
bbsales@birdbarrier.com

Used with permission