Target Bird:Pigeon or larger
Bird Pressure:Light/medium
Material:Stainless steel and Delrin Plastic
Installation:Delrin base is screwed to surface, glue-on bases available
Ease of Installation: Easy
Daddi Long Legs long wavy rods provide the only real solution
to bird problems on flat, raised surfaces like air-conditioning
units. They are fast and easy to install, and can be removed
for maintenance.
A watertight adhesive gasket will keep water from the screw holes so the light itself will not be damaged.
The Daddi Long Legs is a product in a class by itself. It is the only product available that solves the problem of pigeons on large, flat surfaces. Daddi Long Legs will keep pigeons and larger birds from landing on light-pressure surfaces like air conditioning units, street lights and flat roofs themselves.
How it WorksThin stainless steel rods rotate in the breeze and wave around the protected area, interfering with birds as they attempt to land. The rods should overhang the edges of the surface so the birds cannot land. Easy to Install
Daddi Long Leg's Delrin (plastic) base can be screwed into virtually any surface, and is provided with a 1/4" adhesive neoprene gasket. Although the Delrin base itself cannot be glued to a surface, an intermediate PVC base is available that can be glued in place with Bird Barrier Bond. Removable
If you need access to the area, the upper section of the Daddi Long Legs can be separated from the base simply by pulling upwards Hard To See
The Daddi Long Legs, like most Bird Barrier products, is hard to notice from a short distance, and becomes invisible from 50 feet or more. This is the main reason cities and shopping malls have made the Daddi Long Legs the system of choice for keeping birds off their low-level, visible street lights. Humane
The tips of the waving rods have plastic balls secured in place, so the rods cannot poke a bird, or an unsuspecting human in the eye.
Daddi Long Leg's Delrin base will not accept glue so we've introduced the Glue-on-Base adapter. Made from PVC and pre-drilled to the exact screw configuration.
Daddi Long Leg's upper housing mechanism can be removed from its lower base unit in the event you need access to the protected area. Simply pull the top up from the stainless steel spindle and put the rods aside. To reinstall, just slip the housing mechanism over the spindle and force the Delrin lock-washer up inside the housing with a screw driver.
Prices: Call 1-800-503-5444 or 310-793-1733 Daddi Long Legs and Accessories
Daddi Long Legs - 8ft (ea.) DD-8000
Daddi Long Legs - 4 ft (ea.) DD-4000
DDL Glue-on-Base - PVC (ea) DD-B100